8000Nm TCVJ(R) 1000 rpm at 10 degree angle Coupling

(Product Code: 8C-10)

Description:

• True constant velocity high angle shaft coupling through all angles and rotation and articulation.

• Maximum working articulation angle of 10 degrees. Coupling does provide a stroke limiting device to prevent angle being exceeded.

• Nominal torque rating of 8,000Nm  (1)

• Maximum peak torque rating of 20,000 Nm for short duration periods.

• Maximum speed of rotation 1,000 rpm.

• Generation and excitation of vibration forces is minimised through patented spherical dividing mechanism providing true constant velocity rotation.

• True point centricity enabling pivoting applications to be fully realised.

• High torsional and radial rigidity. Axial length compensation can be achieved by appropriate splined shaft connections or similar if required.

• High axial rigidity feature allows for axial load transfer. eg transfer of thrust loads.

• Combine two TCVJ couplings with a splined connecting shaft to provide axial and radial misalignment applications up to 10 degree angles.

• No requirement for phased or parallel connecting flanges as with traditional UJ technology.

• Minimal heat generation from roller bearing componentry unlike traditional cv joint technology thus providing highest efficiency and maximum service life at high speeds AND full angle.

• TCVJ is corrosion protected

• (1)Actual bearing life depends on combination of factors including equivalent speed, torque and angle as well as shock loads, relubrication frequency and environmental conditions.

Special Instructions:
Continuous operation of the TCVJ coupling at 0 degrees is not recommended as this will cause excessive wear on bearings and cause damage to the coupling. For maximum efficiency and life of the TCVJ coupling, a minimum operating angle of 2.0 degrees is recommended.

Manufacturer: Thompson Couplings Limited

Unit Of Measure: EA

Price On Application